Service time: Monday to Friday 9:00-18:00
PSR-SCP-24UC/URM/5X1/1X2 - PSR-SCP- 24UC/URM/5X1/1X2 2981952 PHOENIX CONTACT Coupling relay
In Stock Hot Product

PSR-SCP-24UC/URM/5X1/1X2

PSR-SCP- 24UC/URM/5X1/1X2 2981952 PHOENIX CONTACT Coupling relay

$0.00 USD
4783 in stock
Key Specifications
: High demand
Depth: 99 mm
Shock: 15g (In the event of stress caused by shock, contact reactions are possible for up to 2 ms.)
Width: 22.5 mm
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support

Technical Specifications

Parameter Value
High demand
Depth 99 mm
Shock 15g (In the event of stress caused by shock, contact reactions are possible for up to 2 ms.)
Width 22.5 mm
Height 114.5 mm
Category 1
pluggable yes
Relay type Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
Application Safe switch off
Certificate CE-compliant
Output fuse 10 A gL/gG (N/O contact)
Product type Coupling relay
Restart time < 1 s (Boot time)
Screw thread M3
Mounting type DIN rail mounting
Recovery time < 500 ms
Stop category 0
Inrush current typ. 350 mA DC (Δt s)
Product family PSRclassic
Color (Housing) yellow (RAL 1018)
Article revision 06
Contact material AgSnO2
Housing material Polyamide
Maximum altitude max. 2000 m (Above sea level)
Stripping length 7 mm
Connection method Screw connection
Mounting position vertical or horizontal
Sq. Total current 72 A2
Tightening torque 0.6 Nm
Protective circuit Surge protection; Varistor
Switching capacity min. 50 mW
Input voltage range 20.4 V AC/DC ... 26.4 V AC/DC
Note on application Only for industrial use
Degree of protection IP20
Typical release time typ. 20 ms (when controlled via A1)
Standards/regulations DIN EN 50178
Vibration (operation) 10 Hz ... 150 Hz, 2g (In the event of stress caused by vibration, contact reactions are possible for up to 1 ms.)
Contact switching type 5 enabling current paths
Maximum inrush current 6 A
Nominal operating mode 100% operating factor
Performance level (PL) c
Inrush current, minimum 10 mA
Mechanical service life 10x 106cycles
Power consumption at US typ. 1.2 W
Rated insulation voltage 250 V
Maximum switching voltage 230 V AC/DC (Observe the load curve)
Minimum switching voltage 5 V AC/DC
Operating voltage display 1 x green LED
Typ. starting time with Us typ. 20 ms (when controlled via A1)
Conductor cross-section AWG 24 ... 12
Limiting continuous current 6 A (N/O contact)
Maximum switching frequency 0.5 Hz
Safety Integrity Level (SIL) 1
Conductor cross section rigid 0.2 mm² ... 2.5 mm²
Rated surge voltage/insulation 4 kV / basic isolation (safe isolation, reinforced isolation and 6 kV between A1/A2, 53/54, 71/72 and 13/14, 23/24, 33/34, 43/44.)
Ambient temperature (operation) -20 °C ... 55 °C
Rated control supply current IS typ. 47 mA
Conductor cross section flexible 0.2 mm² ... 2.5 mm²
Switching capacity (360/h cycles) 4 A (24 V (DC13))
Interrupting rating (ohmic load) max. 144 W (N/O contact, 24 V DC, τ = 0 ms)
Ambient temperature (storage/transport) -40 °C ... 85 °C
Rated control circuit supply voltage US 24 V AC/DC -15 % / +10 %
Min. degree of protection of inst. location IP54
Maximum interrupting rating (inductive load) 42 W (N/O contact, 24 V DC, τ = 40 ms)
Max. permissible humidity (storage/transport) 75 % (on average, 85% infrequently, non-condensing)
Max. permissible relative humidity (operation) 75 % (on average, 85% infrequently, non-condensing)
Maximum power dissipation for nominal condition 8.56 W (at UB= 26.4 V DC, US= 24 V, IS= 47 mA, n = 1, IL² = 72 A², Rcontact= 0.1 )
Switching capacity in accordance with IEC 60947-5-1 3 A (24 V (DC13))

Product Description

Secure coupling relay with forced-conduction contacts, 5 normally open contacts, 1 normally closed contacts, plug-in screw terminal, width: 22.5 mm
Key Features
  • Industrial grade quality
  • RoHS compliant
  • CE certified
  • 1-year warranty

Product Documents

Datasheet

Technical specifications and performance data

User Manual

Installation and operation guide

Top