In Stock Hot Product
PSM-ME-RS232/TTY-P
PSM-ME-RS232/TTY-P 2744458 PHOENIX CONTACT Interface converter
$0.00
USD
4847 in stock
Key Specifications
GTIN:
4017918171803
Note:
Made to Order (non-returnable)
Orderkey:
2744458
Catalog page:
Page 323 (C-6-2017)
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| GTIN | 4017918171803 |
| Note | Made to Order (non-returnable) |
| Orderkey | 2744458 |
| Catalog page | Page 323 (C-6-2017) |
| Depth (Note) | 118.6 mm |
| Packing unit | 1 pc |
| Width (Note) | 22.5 mm |
| Height (Note) | 99 mm |
| Caption (Note) | Slim design |
| (Power supply) | 126 Ω (Input) |
| Country of origin | DE (Germany) |
| (Serial interface) | Class I, Zone 2, Ex nA IIC T4 Gc X |
| Custom tariff number | 85176200 |
| (Ambient conditions) | Class I, Zone 2, Ex nA IIC T4 Gc X |
| Altitude (Dimensions) | 5000 m (For restrictions see manufacturer's declaration) |
| Impedance (Power supply) | ≤ 117 Ω (Output) |
| MTBF (Ambient conditions) | 1989 Years (Telcordia standard, 25°C temperature, 21% operating cycle (5 days a week, 8 hours a day)) |
| Signal (Serial interface) | ± 2 kV (42 Ω) |
| Color (Ambient conditions) | green |
| Dimensional drawing (Note) | |
| Interface 1 (Power supply) | V.24 (RS-232) interface in acc. with ITU-T V.28, EIA/TIA-232, DIN 66259-1 |
| Interface 2 (Power supply) | TTY interface, CL2 in acc. with DIN 66348-1 |
| Comments (Serial interface) | Criterion B |
| Noise immunity (Dimensions) | EN 61000-6-2:2005 |
| (Standards and Regulations) | For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
| Protective circuit (General) | Surge protection Suppressor diode |
| DNV GL-EMC (Serial interface) | B |
| Operating mode (Power supply) | Active, semi active, passive |
| Output current (Power supply) | 2x 20 mA ±10 % (Loop current) |
| Pin assignment (Power supply) | DTE/DCE switchover via switch |
| Bit delay (Ambient conditions) | < 3 µs |
| Conformance (Serial interface) | CE-compliant |
| Net weight (Ambient conditions) | 179.6 g |
| Conformance (Ambient conditions) | CE-compliant |
| Connection method (Power supply) | Pluggable screw connection |
| Nominal supply voltage (General) | 24 V AC/DC ±20 % (via pluggable COMBICON screw terminal block) |
| Degree of protection (Dimensions) | IP20 |
| Noise emission (Serial interface) | EN 61000-6-4 |
| Noise immunity (Serial interface) | EN 61000-6-2:2005 |
| UL, USA/Canada (Serial interface) | 508 recognized |
| DNV GL-Humidity (Serial interface) | A |
| Frequency range (Serial interface) | Test Level 3 |
| Protocols supported (Power supply) | transparent protocol |
| Transmission length (Power supply) | 1000 m (shielded twisted pair) |
| Bit distortion (Ambient conditions) | < 5 % |
| DNV GL-Enclosure (Serial interface) | Required protection according to the Rules shall be provided upon installation on board |
| DNV GL-Vibration (Serial interface) | A |
| Noise emission (Ambient conditions) | EN 61000-6-4 |
| Noxious gas test (Serial interface) | ISA-S71.04-1985 G3 Harsh Group A |
| UL, USA/Canada (Ambient conditions) | 508 recognized |
| Contact discharge (Serial interface) | ± 6 kV (Test Level 3) |
| Weight per Piece (excluding packing) | 179.600 g |
| DNV GL-Temperature (Serial interface) | B |
| Housing material (Ambient conditions) | PA |
| Typical current consumption (General) | 75 mA (24 V DC) |
| China RoHS (Standards and Regulations) | Environmentally Friendly Use Period = 50 |
| REACh SVHC (Standards and Regulations) | Lead 7439-92-1 |
| Serial transmission speed (Power supply) | ≤ 19.2 kbps |
| Shipbuilding approval (Serial interface) | DNV GL |
| Standards/regulations (Serial interface) | EN 55011 |
| Electrical isolation (Ambient conditions) | VCC // V.24 (RS-232) // TTY |
| Transmission channels (Ambient conditions) | 2 (1/1), RxD, TxD, full duplex |
| Ambient temperature (operation) (Dimensions) | 0 °C ... 55 °C |
| Permissible humidity (operation) (Dimensions) | 10 % ... 95 % (non-condensing) |
| Utilization restriction (Key Commercial Data) | EMC: class A product, see manufacturer's declaration in the download area |
| Load/output load current output (Power supply) | ≤ 500 Ω |
| Conductor cross section AWG max. (Power supply) | 13 |
| Conductor cross section AWG min. (Power supply) | 24 |
| Electromagnetic compatibility (Serial interface) | Conformance with EMC Directive 2014/30/EU |
| Test voltage data interfaces (Ambient conditions) | 2 kV AC |
| Electromagnetic compatibility (Ambient conditions) | Conformance with EMC Directive 2014/30/EU |
| Connection in acc. with standard (Serial interface) | CUL |
| Ambient temperature (storage/transport) (Dimensions) | -40 °C ... 85 °C |
| Conductor cross section flexible max. (Power supply) | 2.5 mm² |
| Conductor cross section flexible min. (Power supply) | 0.2 mm² |
| Test voltage data interface/power supply (Ambient conditions) | 2 kV AC |
Product Description
Interface converter for RS-232 (V.24) to TTY conversion, with galvanic separation, 2 channels, for rail mounting
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
