Service time: Monday to Friday 9:00-18:00
IB IL 24 LSKIP-PAC - IB IL 24 LSKIP-PAC 2897457 PHOENIX CONTACT Inline function terminal
In Stock Hot Product

IB IL 24 LSKIP-PAC

IB IL 24 LSKIP-PAC 2897457 PHOENIX CONTACT Inline function terminal

$0.00 USD
4699 in stock
Key Specifications
: Protection against polarity reversal (segment supply/main supply); Parallel diodes for protection against polarity reversal; in the event of an error the high current flowing through the diodes causes the fuse connected upstream to blow.
Type: modular
Depth: 71.5 mm
Width: 48.8 mm
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support

Technical Specifications

Parameter Value
Protection against polarity reversal (segment supply/main supply); Parallel diodes for protection against polarity reversal; in the event of an error the high current flowing through the diodes causes the fuse connected upstream to blow.
Type modular
Depth 71.5 mm
Width 48.8 mm
Height 135 mm
Current draw max. 1.25 A (at nominal voltage; consisting of: 0.75 A DC for the communications power and 0.5 A DC for the analog voltage supply)
Product type I/O component
ID code (hex) none
Mounting type DIN rail mounting
Product family Inline
Supply voltage 24 V DC (via Inline connector)
Connection name Inline connector
Register length 0 bit
Article revision 06
Protection class III (IEC 61140, EN 61140, VDE 0140-1)
Stripping length 8 mm
Connection method Inline shield connector
Scope of delivery including Inline connectors and marking fields
Input address area 0 Byte
Protective circuit Surge protection (segment supply, main supply, 24 V supply); Input protective diodes (can be destroyed by permanent overload)Pulse loads up to 1500 W are short circuited by the input protective diode.
Special properties for extending the Inline local bus
Transmission speed 500 kbps / 2 Mbps (Can be used in Inline stations with these transmission speeds)
Dimensional drawing
Note on application Only for industrial use
Output address area 0 Byte
Degree of protection IP20
Number of interfaces 1 (incoming local bus)
Supply voltage range 19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Transmission physics Copper
Required parameter data 0 Byte
Air pressure (operation) 70 kPa ... 106 kPa (up to 3000 m above sea level)
Conductor cross section AWG 28 ... 16
Required configuration data 0 Byte
Conductor cross section rigid 0.08 mm² ... 1.5 mm²
Note on the connection method Standard INTERBUS cable
Conductor cross section, rigid 0.08 mm² ... 1.5 mm²
Ambient temperature (operation) -25 °C ... 55 °C
Air pressure (storage/transport) 70 kPa ... 106 kPa (up to 3000 m above sea level)
Conductor cross section flexible 0.08 mm² ... 1.5 mm²
Permissible humidity (operation) 10 % ... 95 % (non-condensing)
Conductor cross section, flexible 0.08 mm² ... 1.5 mm²
Ambient temperature (storage/transport) -25 °C ... 85 °C
Number of devices with parameter channel 63
Permissible humidity (storage/transport) 10 % ... 95 % (non-condensing)
Maximum power dissipation for nominal condition 1.45 W
Number of local bus devices that can be connected max. 63 (without additional power terminal block, observe allowable total current consumption)
Test voltage: 5 V supply incoming local bus / 24 V main supply, 24 V segment supply 500 V AC, 50 Hz, 1 min.
Test voltage: 24 V main supply, 24 V segment supply, 24 V power supply for generating voltages ULand UANA/ functional ground 500 V AC, 50 Hz, 1 min.
Test voltage: 7.5 V communications power, 24 V analog power supply, 24 V power supply for generating voltages ULand UANA/ functional ground 500 V AC, 50 Hz, 1 min.
Test voltage: 5 V supply incoming local bus / 7.5 V communications power, 24 V analog power supply, 24 V power supply for generating voltages ULand UANA 500 V AC, 50 Hz, 1 min.
Test voltage: 7.5 V communications power, 24 V analog power supply, 24 V power supply for generating voltages ULand UANA/ 24 V main supply, 24 V segment supply 500 V AC, 50 Hz, 1 min.

Product Description

Inline, Coupler terminal block, for expansion of the local bus Inline, transmission rate on the local bus: 500 kBit/s / 2 MBit/s, protection index: IP20, including inline connectors and marking fields
Key Features
  • Industrial grade quality
  • RoHS compliant
  • CE certified
  • 1-year warranty

Product Documents

Datasheet

Technical specifications and performance data

User Manual

Installation and operation guide

Top