HC-B 10-A-DT-PER-M

Parameter	Value
	DIN EN 60664
SCCR	5 kA (UL 2237)
Type	B10
Tests	DIN EN 61984
Width	34 mm
Height	70.5 mm
Length	64 mm
Series	HC-B
General	For HEAVYCON-ADVANCE mounting flange and HEAVYCON panel mounting base of B10 type
Product type	Terminal adapter
Assembly note	To ensure correct use, installation in housing with IP54 protection or better is required
Rated current	16 A
Product family	HC-B
Article revision	10
Contact material	Copper alloy
Contact numbering	1 - 10
Connection profile	10+PE
Degree of pollution	3
Dimensional drawing
Number of positions	10
Rated surge voltage	6 kV
Degree of protection	IP20
Overvoltage category	III
Connection technology	Push-in connection
Rated voltage (III/3)	500 V
Standards/regulations	PA: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3)
Conductor cross section	0.5 mm² ... 2.5 mm²
Contact carrier material	PA
Contact surface material	Ag
Insertion/withdrawal cycles	≥ 500
Connection cross section AWG	22 ... 12
Drill hole distance, vertical	27 mm
Ambient temperature (operation)	-40 °C ... 125 °C
Drill hole distance, horizontal	57 mm
Constructional and testing regulations	DIN EN 61984
Flammability rating according to UL 94	V0
Stripping length of the individual wire	10 mm (13 mm with ferrule)

HEAVYCON terminal block adapter with plug insert, B10 series, 10 poles, for the right side of the control cabinet, push-in connection

Technical specifications and performance data

Installation and operation guide

HC-B 10-A-DT-PER-M 1648429 PHOENIX CONTACT Terminal adapter