In Stock Hot Product
FLT-SEC-P-T1-3C-350/25-FM
FLT-SEC-P-T1-3C-350/25-FM 2905419 FLT‐CP‐PLUS‐3C‐350 2882653 PHOENIX CONTACT Combination type 1/2 protective..
$0.00
USD
4775 in stock
Key Specifications
:
SPD according to AS/NZS 1768 Cat. C3
Note:
Max. single impulse: 100 kA (8/20 µs)
Type:
DIN rail module, two-section, divisible
Depth:
74.5 mm (incl. DIN rail 7.5 mm)
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| SPD according to AS/NZS 1768 Cat. C3 | |
| Note | Max. single impulse: 100 kA (8/20 µs) |
| Type | DIN rail module, two-section, divisible |
| Depth | 74.5 mm (incl. DIN rail 7.5 mm) |
| Width | 106.8 mm |
| Height | 95.2 mm |
| EN type | T1 / T2 |
| Altitude | ≤ 2000 m (amsl) |
| SPD Type | 2CA |
| Product type | Combination type |
| Screw thread | M5 |
| Mounting type | DIN rail: 35 mm |
| Material group | I |
| Product family | SEC Family |
| Connection name | Remote fault indicator contact |
| Nominal voltage | 240 V AC |
| Open side panel | No |
| Article revision | 12 |
| Horizontal pitch | 6 Div. |
| Housing material | PA 6.6-FR 20 % GF |
| Pollution degree | 2 |
| Response time tA | ≤ 100 ns |
| Stripping length | 18 mm |
| Connection method | Screw connection |
| Nominal frequency | 50/60 Hz |
| Operating current | 10 mA AC ... 1 A AC |
| Operating voltage | 12 V AC ... 250 V AC |
| Shock (operation) | 30g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z) |
| Tightening torque | 4.5 Nm |
| Mode of protection | L-PEN |
| Nominal voltage UN | 240/415 V AC (TN-C) |
| Switching function | Changeover contact |
| TOV behavior at UT | 415 V AC (5 s / withstand mode) |
| Dimensional drawing | |
| Direction of action | 3L-PEN |
| Insulating material | PA6.6-FR 20% GF |
| Number of positions | 3 |
| AC operating current | 1 A AC |
| Color (Base element) | gray (RAL 7042) |
| Degree of protection | IP20 (only when all terminal points are used) |
| Nominal frequency fN | 50 Hz (60 Hz) |
| Overvoltage category | III |
| CTI value of material | 600 |
| Rated load current IL | 125 A (< 55 °C) |
| Residual voltage Ures | ≤ 1.5 kV (at In) |
| Vibration (operation) | 5g (5 - 500 Hz/2.5 h/X, Y, Z) |
| Color (Male connector) | light gray (RAL 7035) |
| IEC power supply system | TN-C |
| IEC test classification | I / II |
| Standards/specifications | IEC 61643-11 |
| Power distribution system | Delta |
| Conductor cross section AWG | 13 ... 2 |
| Voltage protection level Up | ≤ 1.5 kV |
| Nominal discharge current In | 20 kA |
| Conductor cross section rigid | 2.5 mm² ... 35 mm² |
| Maximum continuous voltage UC | 350 V AC |
| Surge protection fault message | Optical, remote indicator contact |
| Ambient temperature (operation) | -40 °C ... 80 °C |
| Conductor cross section flexible | 2.5 mm² ... 35 mm² |
| Permissible humidity (operation) | 5 % ... 95 % |
| Short-circuit current rating ISCCR | 50 kA |
| Follow current interrupt rating Ifi | 50 kA |
| Max. backup fuse with branch wiring | 315 A (gG) |
| Short-circuit current rating (SCCR) | 50 kA |
| Voltage protection rating VPR (L-G) | 1500 V |
| Voltage protection rating VPR (L-L) | 2000 V |
| Flammability rating according to UL 94 | V-0 |
| Nominal discharge current In(8/20) µs | 25 kA |
| Ambient temperature (storage/transport) | -40 °C ... 80 °C |
| Maximum discharge current Imax(8/20) µs | 50 kA |
| Max. backup fuse with V-type through wiring | 125 A (gG) |
| Total discharge current Itotal(10/350) µs | 75 kA |
| Impulse discharge current (10/350) µs, charge | 12.5 As |
| Maximum continuous operating voltage MCOV (L-G) | 350 V AC |
| Maximum continuous operating voltage MCOV (L-L) | 700 V AC |
| Front of wave sparkover voltage at 6 kV (1.2/50) µs | ≤ 1.5 kV |
| Impulse discharge current (10/350) µs, peak value limp | 25 kA |
| Impulse discharge current (10/350) µs, specific energy | 160 kJ/Ω |
Product Description
Plug-in lightning current arrester, according to type 1/class I, for three-phase power grids with combined PE and N routing in one conductor (L1, L2, L3, PEN).
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
