In Stock Hot Product
EM-CP-PP-ETH
EM-CP-PP-ETH 2902802 PHOENIX CONTACT AC charging controller
$0.00
USD
3673 in stock
Key Specifications
:
Client
Housing:
DIN 43880
Interface:
Ethernet (1x)
Bus system:
RS-485
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| Client | |
| Housing | DIN 43880 |
| Interface | Ethernet (1x) |
| Bus system | RS-485 |
| Application | AC charging controller for commercial applications (EU) |
| Conformance | CE-compliant |
| Output name | 4 digital outputs |
| Product type | AC charging controller |
| Charging mode | Mode 3, Case B + C |
| Mounting type | DIN rail mounting |
| Noise emission | EN 61000-6-3 |
| Noise immunity | EN 61000-6-2 |
| Operating mode | Stand-Alone |
| Product family | CHARX control advanced |
| Supply voltage | 230 V |
| Frequency range | 45 Hz ... 65 Hz |
| Article revision | 15 |
| Charging standard | Type 2 |
| Connection method | Screw connection |
| Mounting position | any |
| Nominal current IN | ≤ 8 mA |
| Transmission speed | 9.6 kbps (Standard) |
| Current consumption | < 1 W |
| Protocols supported | Modbus/TCP |
| Transmission length | max. 100 m (with shielded, twisted-pair data cable) |
| Degree of protection | IP20 |
| Number of interfaces | 1 |
| Supply voltage range | 110 V AC ... 240 V AC (nominal voltage range) |
| Connection technology | Screw connection |
| Low Voltage Directive | Conformance with LV directive 2006/95/EC |
| Standards/regulations | IEC 61851-1 |
| Input voltage range U1 | -3 V ... 5 V (Off) |
| Input voltage range U2 | 15 V ... 30 V (On) |
| Max. switching current | 2 A |
| Maximum output current | 0.2 A (Total current for all outputs; internally supplied) |
| Maximum output voltage | 30 V |
| Max. current consumption | 40 mA |
| Nominal input voltage UN | 24 V |
| Number of digital inputs | 4 |
| Transmission speed range | 2.4 kbps ... 19.2 kbps (adjustable) |
| Type of charging current | AC 3-phase |
| Maximum switching voltage | 250 V AC |
| Nominal power consumption | < 1 W (No-load) |
| Number of charging points | 1 |
| Serial transmission speed | 10/100 Mbps |
| Minimum switching capacity | 1500 VA |
| Conductor cross section AWG | 24 ... 12 |
| Data flow control/protocols | Modbus/RTU (slave) |
| Number of supported devices | 1 |
| Conductor cross section rigid | 0.2 mm² ... 4 mm² |
| Electromagnetic compatibility | Conformance with EMC Directive 2004/108/EC |
| Ambient temperature (operation) | -25 °C ... 60 °C |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Permissible humidity (operation) | 30 % ... 95 % (non-condensing) |
| Maximum output current per channel | 0.6 A (Per output; externally supplied) |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Locking release in the event of mains failure | With EM-EV-CLR-12V locking release module (Item No. 2903246) as an option |
Product Description
The EV Charge Control is used to charge electric vehicles in a three-phase alternating current network in accordance with IEC 61851-1 Mode 3. All the control functions required for this are integrated
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
