In Stock Hot Product
DEK-REL-G24/21
DEK-REL-G24/21 2964500 PHOENIX CONTACT Relay Module
$0.00
USD
3894 in stock
Key Specifications
:
Freewheeling diode; Freewheeling diode
Color:
green (RAL 6021)
Depth:
56 mm
Width:
6.2 mm
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| Freewheeling diode; Freewheeling diode | |
| Color | green (RAL 6021) |
| Depth | 56 mm |
| Width | 6.2 mm |
| Height | 80 mm |
| Insulation | Safe isolation: Control side / contact side |
| Application | Universal |
| Product type | Relay Module |
| Screw thread | M3 |
| Assembly note | in rows with zero spacing |
| Mounting type | DIN rail mounting |
| Operating mode | 100% operating factor |
| Product family | DEK |
| Article revision | 11 |
| Contact material | AgSnO |
| Drive (polarity) | polarized |
| Pollution degree | 2 |
| Stripping length | 8 mm |
| Connection method | Screw connection |
| Mounting position | any |
| Tightening torque | 0.5 Nm |
| Drive and function | monostable |
| Protective circuit | Reverse polarity protection; Polarity protection diode |
| Switching capacity | 2 A (at 24 V, DC13) |
| Input voltage range | 19.2 V AC/DC ... 26.4 V AC/DC (20 °C) |
| Note on application | Use of EB 80-DIK... bridges in the DEK terminal blocks: Absorption of humidity from the ambient air as well as an unfavorable tolerance between a larger number of DEK terminal blocks and the EB 80-DIK... bridge may cause (minor) expansion of the DEK housing. When the EB 80-DIK... bridges are used, therefore, it is recommended that these be disconnected after about 10 to 12 DEK terminal blocks and a wire bridge to the next DEK terminal block be inserted in their place. |
| Rated surge voltage | 6 kV |
| Overvoltage category | III |
| Typical release time | 5 ms |
| Standards/regulations | IEC 60947-5-1 |
| Typical response time | 8 ms |
| Contact switching type | 1 changeover contact |
| Maximum inrush current | 10 A (4 s) |
| Min. switching current | 10 mA |
| Type of switch contact | Single contact |
| Mechanical service life | approx. 107cycles |
| Nominal input voltage UN | 24 V DC |
| Rated insulation voltage | 250 V |
| Maximum switching voltage | 250 V AC/DC |
| Minimum switching voltage | 12 V AC/DC |
| Operating voltage display | Yellow LED |
| Conductor cross section AWG | 24 ... 14 |
| Limiting continuous current | 6 A |
| Typical input current at UN | 9 mA |
| Date of last data management | 02.05.2024 |
| Conductor cross section rigid | 0.2 mm² ... 2.5 mm² |
| Test voltage (Winding/contact) | 4 kV AC (50 Hz, 1 min., winding/contact) |
| Ambient temperature (operation) | -20 °C ... 50 °C |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Interrupting rating (ohmic load) max. | 140 W (at 24 V DC) |
| Ambient temperature (storage/transport) | -20 °C ... 70 °C |
| Maximum power dissipation for nominal condition | 0.22 W |
Product Description
Borne-relay, with soldered miniature power relays, contacts (AgSnO): Medium to large powers, 1 switched contact, input voltage 24 V DC, for installation on NS 35/7.5, terminal width 6.2 mm
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
